How to effectively improve the product quality of metal stamping parts

Hardware is a relatively common product in daily production, ranging from small accessories to large equipment, most of them use metal stamping technology. There are elites in all walks of life, and so are the products. mm to calculate.

  Regarding how to improve the quality of hardware products, Dasheng Hardware Supply provides some suggestions for reference: when planning hardware, judge according to the structure and surface requirements of the product, and try to use a process with a smaller processing area to plan; about product post-production It is not only necessary to meet the specification requirements of the hardware itself, but also to consider the subsequent process, such as the process requirements of chips and surface treatment after stamping; for hardware with complex shapes, it is also necessary to consider whether the material has rebounded after stamping. , Considering the plasticity of the material, the better the plasticity, the harder it is to separate.

　　At the same time, it is also necessary to consider the selection of reasonable stamping equipment; the debugging needs to be completed when the mold is installed, and at the same time, the correct stamping oil is selected. These slender work items can be helpful to the product. It is helpful to improve the quality of hardware products.

　　Stamping products will encounter planning changes, process changes, etc. in the planning and production process. How to ensure that these changes will not affect the subsequent production quality, it is necessary to do a good job of verification at the front end of production, and do the first inspection. . The purpose of the first inspection of stamping parts: it is mainly to prevent the batch products from appearing out of specification, repair, scrap and other problems, a method to control the product process in advance, to determine whether there are problems with the 5-ring elements, and to ensure product quality A method .